Antox 71E - Gel for steel cleaning and after welding

Gel (paste) for cleaning and pickling stainless and acid-resistant steel, nickel and its alloys.

Very effectively cleans the blue color that occurs in the area of ​​the welding seam after any type of welding. Especially successfully used after TIG welding in the food industry to make the surface clean and beautiful. Antox 71E does not contain hydrochloric acid and chlorides.

Read the instructions for use carefully before use. Mix the paste with a wooden or plastic object or rinse it a little before use. Do not use metal objects for mixing. Apply with a dedicated natural or synthetic bristle brush. 
After etching, rinse the material thoroughly with water. A natural material, plastic or steel brush can be used for rinsing. Rinsing is also possible with a high-pressure pump. Disposal of used paste must be carried out in accordance with legislation. Antox 71E contains 4% hydrofluoric acid and 20% nitric acid. 
 

Attention! 
 

Protect from children! Do not allow entry into the respiratory tract, esophagus, as well as direct contact with the skin. Causes severe burns. Protect from direct sunlight. 
Safety measures: 
Store and use in well-ventilated areas. It is recommended to work with Antox 71E in suitable protective clothing, glasses, gloves. If the product gets into the eyes, rinse them thoroughly with water and see a doctor immediately. If you feel sick after working with Antox 71E, go to the doctor immediately (preferably present this instruction). 
Use only for production purposes.

Classification TLV 9026 01/03

Exposure time             Rust and acid resistant steel           Nickel and nickel alloys         Copper-nickel alloys 
                                                  15 – 60 min.                                  5 - 20 min.                        5 - 20 min. 
 

<