Loxeal 86-72 - Threadlocking adhesive

Loxeal 86-72 - Adhesive for fixing and sealing screws, studs, bolts. Resistant in very high temperatures. Unscrewing strength

Very high temperature (+230° C) resistant, high strength anaerobic adhesive for locking and sealing thread connections and fitted parts. High viscosity and thixotropic effect allow larger tolerances

Highly resistant to corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals

DIN DVGW approved thread sealant for gas (according to DIN EN 751-1 Reg. Nr. NG - 5146AT0264).

The product is recommended for use on metal surfaces. Clean and degrease parts before bonding with Loxeal Cleaner 10. Apply product to fill the gap, assemble parts, and hold on for curing time. The liquid product can damage the coating, some plastics, and elastomers and late stress-cracking events might be induced if used with some thermoplastics. For disassembly, use normal tools and eventually heat pieces at +150°C/+250°C, remove any residue of cured product mechanically, and clean parts with Acetone.