Particle Pal FS9V2 + Water & Density Sensor - Laser Portable Particle Counter

The Fuel Quality Monitor comes with a fitted Laser Particulate Sensor, Accurate Water %RH sensor as well as a highly accurate Density Sensor that can alert to the presence of just 1% by volume of kerosene or water, some of the fluids typically substituted in diesel to save cost. It works on all diesel fuels, bunker fuel and gas oil.

FS9V2-RH Real-time measurement and display of particulate and water as %RH (% Saturation)

We have further developed the award-winning Particle Pal by integrating a water sensor that displays the percent saturation or relative humidity (RH) in real-time.

By incorporating a state of the art water sensor into the FS9V2 compact design, you can now get instant water %saturation levels for accurate, repeatable measurement as well as the same features the new FS9V2 Particle Pal offers; ISO/NAS/SAE readouts of particulate cleanliness, memory, priming features etc.

Why is water level measurement so important?

Most oils have a maximum allowable water content level. When water levels exceed this value, whether as emulsified, entrained or free water, moisture-related problems are inevitable. Rapid oxidation, depletion of the additive package and rusting of internal components are just a few of the many issues that water in oils causes.

All Particle Pals, including this unit, can be used on live hydraulic systems (up to a pressure of 350 bar) when the high pressure reducing valve is purchased.

Particle Pal is a self-contained portable measuring system that gives ISO, NAS and SAE Particulate Cleanliness readings and Water Content analysis for Oils and Diesel Fuels. Complete with a rechargeable battery, high-pressure internal gear pump and controlled flow rate. Whether on-site or in the laboratory, the Particle Pal will provide cleanliness readings in real-time to allow you to understand the condition of your oil or fuel.

Our FS9V2 units now have a single LCD showing all the connected sensors in real-time. We've added an internal memory for capturing data with a simple USB data transfer of results which can be printed in tabular or graphical format. Also included is powerful trending software which shows real-time cleanliness data in graphical format via USB transfer to a connected PC.

Water sensors can be included to show the humidity of any oil as a % saturation. For diesel fuels, we can include genuine water parts per million (PPM) sensor. Also for fuels, we have developed a density sensor version which accurately detects the slightest change in a diesel fuel’s density which is helpful when fuel tampering is suspected.

All Particle Pal’s can draw from oil stored in tanks or from sample bottles. Alternatively, the units can analyse oils from pressurised systems via a High-Pressure adaptor which is capable of 350 Bar inlet pressures. The internal pump can handle viscosities of up to 420 cSt.

OIL TESTING 

In both Hydraulic and Lubrication systems knowing the particulate cleanliness and water content data can prevent serious system failures and component damage. By testing oil cleanliness in real-time, the necessary protection can be put in place to protect sensitive components. Samples can be taken directly from the reservoir or directly from an active fluid power system up to 350 Bar (via a High-Pressure Adaptor) or from an oil sample drawn from the system earlier. The Particle Pal can be used in a range of applications and industries including off-road plant, rail, construction, hydraulic and mechanical presses, marine and many, many more.

DIESEL FUEL TESTING:

The Standard Particle Pal FS9V2 is also suitable for measuring the solid particulate content is all diesel fuels. Results are displayed as ISO codes. The diesel fuel market has adopted ISO cleanliness codes as the standard for ensuring fuel cleanliness. Ideally, fuel should be at least ISO 18/16/13 as a bare minimum.

The FS9V2 is ideal for tank sampling, bottle sampling or drawing from a live system, for water analysis we’ve included an accurate, temperature compensated genuine Parts Per Million (PPM) water sensor. Also available is a highly accurate density sensor to detect the slightest change in diesel fuels integrity, this can be useful to detect if fuel has been tampered with or substituted with, for example, water or kerosene.

To find out how the Particle Pal can benefit you, please contact one of our expert team to discuss further.

Particle Pal Range: Please click on the links below to see the other Particle Pal models in the range:

Oils

FS9V2-RH Particle Pal: Live Particulate and %RH Water detection (designed for oils but is also compatible with diesel) 
Particle Pal Life: Particulate, Water Content and Remaining Useful Life of any oil.
Features
Incorporates latest laser particle counting technology
Single LCD
Built-in memory for storing results
Real-time graphics display via software transfer
USB connectivity for data transfer
The rechargeable battery gives up to 6 hours of continuous use
Benefits
Live ISO, NAS and SAE results can be displayed
Compact, unit with robust casing

Self-contained with integral pump

Sample direct from oil reservoir or live system up to 350Bar
Accurate, repeatable and consistent results
The ideal survey tool for field and laboratory use